Rising Film Evaporator
28 มีนาคม 2566
ผู้ชม 229 ผู้ชม
SUMMARY
The single tube-in-jacket evaporator replicates industrial units which often contain scores of much longer tubes within the steam space. The component parts of the industrial process have been scaled down, feed tank, vapour/liquid separator, condenser, concentrate tank, condensate tank, CIP pump and vacuum pump, all manufactured from hygienic materials such as stainless steel, PTFE and glass.
The system is supported within a stainless steel framework and requires only a connection to suitable steam, electrical and water services for operation.
Only 0.65m² of floor space is required to install the evaporator and it has been designed to fit easily into a room of standard height.
FEATURES & BENEFITS
- Small quantities of liquid products can be concentrated
- Easily cleaned and maintained
- Low product usage eases the disposal of waste
- Nominal throughput only 10 l/hr
Features
- Single-tube heat exchanger
- Integral CIP system
- Integral control console
- Data logging and analysis included
TECHNICAL SPECIFICATIONS
Evaporator tube length: 1.36m
Heat transfer area: 0.06m2
Max evaporation rate: 10 l/hr
Max steam consumption: 15 kg/hr
Max steam pressure (working): 1.7 bar
Condenser area: 0.17m2
Feed tank capacity max: 30l
Concentrate collecting tank capacity: 5l
Condensate collecting tank capacity: 5l
CIP pump (flexible impeller): 8 l/min @ 20ft H2O
System vacuum: 225mm Hg ABS (increased when pump heads in series)
