Applied Scientific Instruments Co., Ltd.

บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จํากัด

ศูนย์รวมเครื่องมือทดสอบ เครื่องมือวิทยาศาสตร์ เครื่องมือวิเคราะห์ทุกชนิด

 

ติดต่อสอบถาม

ผ่าน LINE ID

@asithailand

 

Shell and Tube Heat Exchanger

หมวดหมู่สินค้า: HT SERIES - COMPUTER CONTROLLED HEAT EXCHANGE / HEAT TRANSFER
รหัส : HT33X
The shell and tube heat exchanger is commonly used in the food and chemical process industries. This type of exchanger consists of a number of tubes in parallel enclosed in a cylindrical shell. Heat is transferred between one fluid flowing through the tubes and another fluid flowing through the cylindrical shell around the tubes.

20 เมษายน 2566

ผู้ชม 299 ผู้ชม

DESCRIPTION

The shell and tube heat exchanger is commonly used in the food and chemical process industries. This type of exchanger consists of a number of tubes in parallel enclosed in a cylindrical shell.

Heat is transferred between one fluid flowing through the tubes and another fluid flowing through the cylindrical shell around the tubes.

The miniature exchanger supplied is designed to demonstrate liquid to liquid heat transfer in a 1-7 shell and tube heat exchanger (one shell and seven tubes with two transverse baffles in the shell).

 

TECHNICAL SPECIFICATIONS

The accessory consists of a miniature shell and tube heat exchanger with the following features:

  • Hot fluid in the inner tubes and cold fluid in outer shell to minimise heat loss from the exchanger without the need for additional insulation
  • Seven stainless steel tubes, 6.35mm OD
  • The outer annulus, end caps and baffles are constructed from clear acrylic to allow visualisation of the heat exchanger construction and minimise thermal losses
  • Nominal combined heat transfer area of 20,000mm2, (equivalent to that of the HT31X Tubular Heat Exchanger for direct comparison)
  • Cold fluid (cold water) enters one end of the shell at the bottom and exits at the opposite end at the top having flowed over and under two transverse baffles inside the shell

Thermocouples installed on the HT30X service unit to measure:

  • Hot fluid
  • Hot fluid outlet
  • Cold fluid inlet
  • Cold fluid

 

FEATURES & BENEFITS

  • A miniature shell and tube heat exchanger for use with an Armfield Computer Controlled Heat Exchanger Service Unit
  • Comprises an outer shell and seven internal tubes. There are two transverse baffles inside the shell
  • The heat exchanger is constructed from stainless steel tube and clear acrylic. It is mounted on a PVC baseplate which is designed to be installed on the plinth of the Heat Exchanger Service Unit without the need for tools
  • The stainless steel tubes can be removed from the heat exchanger for cleaning
  • A comprehensive instruction manual is included

 

 

ขอใบเสนอราคา

ดาวน์โหลดโบว์ชัวร์

 

 

Engine by shopup.com