Applied Scientific Instruments Co., Ltd.

บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จํากัด

ศูนย์รวมเครื่องมือทดสอบ เครื่องมือวิทยาศาสตร์ เครื่องมือวิเคราะห์ทุกชนิด

 

ติดต่อสอบถาม

ผ่าน LINE ID

@asithailand

 

Film and Dropwise Condensation Demonstration unit

หมวดหมู่สินค้า: TH SERIES – THERMODYNAMICS
รหัส : TH6
The TH6 Film and Dropwise Condensation Demonstration unit demonstrates the formation of condensation of water on two differing surfaces with the ability of the operator, to change a variety of parameters and observe the effects and undertake calculations based upon the presented data.

19 เมษายน 2566

ผู้ชม 142 ผู้ชม

DESCRIPTION

The Armfield TH6 Dropwise and Film Condensation Unit has been designed as a highly visual means for students to observe the two condensation processes and study the effects of varying the vacuum and heat input whilst gathering data concerning temperatures, pressure and flowrates to be able to undertake a variety of calculations involved in the condensation process. Additionally, the unit will allow the operator to understand the influence of air as a non-condensable gas on the condensation processes.

The unit uses the latest ArmBUS technology to collect, display and store data in a clear format as well as control certain parameters. Other parameters can be controlled manually by the student by manipulation of valves on the working face of the unit. Safety features are also designed into both software and hardware to greatly reduce the risk of over-pressurisation and thus safeguard students undertaking experimental work.

 

DEMONSTRATION CAPABILITIES

  • Demonstration of film and dropwise condensation
  • Determining coefficients of heat transfer and heat flux at constant pressure
  • Determine the influence of pressure on the coefficients of heat transfer
  • Demonstrate the effect of non-condensable gases (air) on the heat transfer coefficients
  • Determine the influence of temperature deltas between the saturated steam and the condenser surfaces on the coefficients of heat transfer

 

TECHNICAL SPECIFICATIONS

  • Matt finished copper cold finger condenser: 90-100mm length 12.7mm OD
  • Polished copper cold finger condenser: Gold plated 90-100mm length 12.7mm OD
  • Flow rates to each condenser: 0-7.5l/min
  • Flow rate to the vacuum educator: 0-15l/min
  • Electronic flowmeters: 0-7.5l/min
  • Operational pressure: 100-1500 mbara
  • 11x PT100 Thermocouples: 1-120 °c
  • 1 x electronic pressure sensor: 0-2500 mbar
  • Water level: Optical Sensor

 

 

ขอใบเสนอราคา

ดาวน์โหลดโบว์ชัวร์

 

 

Engine by shopup.com