GELBO FLEX TESTER WITH PARTICLE COUNTER
31 กรกฎาคม 2565
ผู้ชม 530 ผู้ชม
Summary
The Gelbo Flex Lint Tester is used to measure the number of loose fibres (lint) shed from non-woven materials in a 30 second time period of flexing. It is important that non-woven textile materials must have a low tendency to lint. The IDM Gelbo Flex Lint Tester is a fast and accurate instrument for determining the linting of non-woven materials. This test can also be applied to other materials like tissues. The sample is subjected to repetitive twisting and compression cycles, air is withdrawn from the testing chamber and particles in the air stream are counted and classified with the laser particle counter.
The IDM Gelbo Flex Lint Tester is a fast and accurate instrument for determining the linting of non-woven materials. This test can also be applied to other materials like tissues. The sample is subjected to repetitive twisting and compression cycles, air is withdrawn from the testing chamber and particles in the air stream are counted and classified with the laser particle counter.
It consists of two 82.8mm diameter mandrels, one fixed and the other attached to a twisting arm to perform a flexing action. The moveable mandrel twists and
compresses the sample at 60 cycles/min with 180° rotation over 120 mm of stroke.
Application
- Non-woven
- Woven
- Textiles
- Healthcare
- Hygiene
- Filtration
- Face Masks
- Surgical gowns, caps, gloves, PPE Clothing
- Hospital Drapes
Specification
Gelbo Flex Lint tester (Main Unit) | |
---|---|
Mandrels | 2 x 82.8mm dia |
Cycles/Min | 60 |
Rotation | 180º |
Stroke | 120 mm |
Flexing Chamber | 300 mm x 300 mm x 300 mm |
Power | 220/240 VAC @ 50 HZ or 110 VAC @ 60 HZ (please specify when ordering) |
Particle Counter | |
Measuring Channels (standard) | 3100+ Measuring Channwls : 0.3, 0.5, 1.0, 5.0, 10.0, 25.0 μm OR |
Storage | Up to 3,000 data sets |
Flow Rate | 1CFM (28.3LPM) |
Power | 220/240 VAC @ 50 HZ or 110 VAC @ 60 HZ (please specify when ordering) |