INTERNAL BOND TESTER - AUTOMATIC SAMPLE PREPARATION (IBP-5A) - IDM

Cod: 080103
Standard: TAPPI T833, T569, ISO 16260.

Automatic sample preparation for the Internal Bond or Ply Bond test. Automatic process, sample preparation with the application of tape, pressure and time, and finally automatic cutting of the samples though a 6-blade cutting system. The only thing that the operator must do is cut the samples to be tested well: 1 inch by 6 inches approximately. Ideal equipment to replace the cutters or manual blades in laboratories and improve the job security of workers. The system of pressure of the samples is made with individual pistons that reduce the standard deviation of the tests by almost 20%, giving a greater homogeneity to the results. It allows to prepare the samples of any old equipment, whatever the brand it may be.

FEATURES:

• Fully automatic independent sample preparation equipment.
• Possibility of using it for the preparation of samples for testing on other equipment (Consult compatible models).
• Automatic and simultaneous preparation of 5 samples (sample area: 25.4mm x 25.4mm (1.0” x 1.0”)).
• Control panel with 7” color touch screen and auxiliary button.
• Automatic cutting using 6 blades (no need for cutters).
• Application of bonding pressure using independent pneumatic actuators. Digitally adjustable pressure and time:
  - Pressure: From 45 PSI to 220 PSI (310 kPa to 1500 kPa) in increments of 0.1 PSI (1 kPa). Bonding pressure error: < +/-2 PSI (+/- 13 kPa).
  - Bonding pressure time: Programmable from 1s to 60s in 1s increments.
• Quick and easy to use and clean.
• Dispenser with dual roll holder. Simultaneous application of tape to both sides of the sample and protective paper collecting rollers.
• CE Marked.

ขอใบเสนอราคา

ดาวน์โหลดโบว์ชัวร์