Disc Brake Apparatus
20 เมษายน 2566
ผู้ชม 126 ผู้ชม
DESCRIPTION
A brake disc is mounted vertically into a sturdy frame. A single shaft runs through the brake disc and the wall bracket supports. A cord pulley mounts to the shaft onto which is mounted a cord terminating in a load hanger.
Two bell crank levers are mounted either side of the brake disc. Through the load hanger and calibrated weights the force is applied to the brake disc and the parameters of braking force, braking torque and normal force can be assessed.
All load hangers, and calibrated weights are supplied with the apparatus. The rotational angle of movement of the disc wheel can be viewed using the external protractor.
Different brake pad materials can be tested as well as their radial position on the brake disc.
EXPERIMENTAL CONTENT
- To determine the most effective brake pad material
- To determine the most efficient radial placing of the brake pad
TECHNICAL SPECIFICATIONS
Brake pad: Ø25mm x 6mm max
Brake pad: Brake material, aluminium, brass and nylon
Stainless steel disc wheel: Ø210mm x 3mm
Radial positions for brake pad: 20mm intervals
Protractor: 360°, 1° increments
Weights set: 3 x 0.1N, 8 x 0.2N, 3 x 1N, 3 x 2N, 1 x 5N, 2 x Load hanger
FEATURES & BENEFITS
- Wall mounted apparatus
- Can be mounted to SV100 Bench Mounted Frame
- One stainless steel disc; four brake pad materials
- Three pad radii
- 360° Protractor for angle recording
- Full set of weights and hangers provided
