Plastic Bending of Beams
หมวดหมู่สินค้า: SV SERIES - STATICS & VIBRATIONS
รหัส : SV501
The experiment plastic bending of beams allows the experimental investigation of how beams behave when placed under a vertical load that causes plastic bending.
20 เมษายน 2566
ผู้ชม 349 ผู้ชม
DESCRIPTION
The beam specimens are made from steel and are 20mm wide with a thickness of 5mm.
The supports can be used in either a fixed configuration where the clamping plate holds the beam in place, simulating a fixed support.
By removing the clamping plate, the support can be used to simulate a simple support.
The external force is applied to the beam via the load cell assembly.
The load cell assembly applies force by applying a deflection to the beam, the load cell measures the force applied to the beam to achieve that amount of deflection. An external force of up to 500N can be applied and measured by the load cell assembly.
EXPERIMENTAL CONTENT
- Elastic bending to plastic deformation of a mild steel beam
- Formation of plastic ‘Hinges’
- How beam fixings affect deformation of Simply Supported, Encastre and Propped Cantilever Beams
- Yield stress
TECHNICAL SPECIFICATIONS
- Beam Specimens
- Material: BS EN 10025-2 S275JR
- σy = 235 MPa
- E = 210 GPa
- 3 x Beam Dimensions = 20mm x 5mm x 800mm
- 1 x Fixed Support
- 1 x Roller Support
- 1 x DTI Holder Assembly
- 1 x Linear Scale
- 1 x Load Cell Assembly
- Force Range: 0 – 500N
- Voltage Range: 0 – 5V
- Linear Scale Connecting Hardware
- Measurable Range: 100mm
- Resolution: 0.01mm
- Universal Frame Mounting Hardware
FEATURES & BENEFITS
- Assembly of a simply supported, propped cantilever or encastre beam set-up
- Supplied with 3 different beam specimens with additional spare beam kits available
- Supplied with Armfield structures software as standard
More.
