Applied Scientific Instruments Co., Ltd.

บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จํากัด

ศูนย์รวมเครื่องมือทดสอบ เครื่องมือวิทยาศาสตร์ เครื่องมือวิเคราะห์ทุกชนิด

 

ติดต่อสอบถาม

ผ่าน LINE ID

@asithailand

 

Combined Convection and Radiation

หมวดหมู่สินค้า: HT SERIES - COMPUTER CONTROLLED HEAT EXCHANGE / HEAT TRANSFER
รหัส : HT14X
The HT14X is one of a range of small scale heat transfer laboratory teaching accessories which demonstrate the basic modes of heat transfer (conduction, convection and radiation).

20 เมษายน 2566

ผู้ชม 487 ผู้ชม

DESCRIPTION

The equipment consists of a centrifugal fan with a vertical outlet duct. At the top of the duct there is a heated cylinder. The mounting arrangement for the cylinder in the duct is designed to minimise loss of heat by conduction to the wall of the duct.

The surface of the cylinder is coated with heat-resistant paint which provides a consistent emissivity close to unity. A K-type thermocouple (T10) attached to the wall of the cylinder, at mid position, enables the surface temperature to be measured under the varying operating conditions.

ArmBUS controlled variable-speed fan blows air through the outlet duct. A vane-type anemometer within the fan outlet duct enables the air velocity in the duct to be measured. Air velocity can be set within the accuracy of ±0.05m/s.

A K-type thermocouple (T9) in the outlet duct allows the ambient air temperature to be measured upstream of the heated cylinder.

PID controller allows rapid heater’s temperature set-point achievement and control to ±0.1°C.

 

EXPERIMENTAL CAPABILITIES

  • Determining the combined heat transfer (Q radiation + Q convection) from a horizontal cylinder in natural convection over a wide range of power inputs and corresponding surface temperatures
  • Measuring the domination of the convective heat transfer coefficient Hc at low surface temperatures and the domination of the radiation heat transfer coefficient Hr at high surface temperatures
  • Determining the effect of forced convection on the heat transfer from the cylinder at varying air velocities

 

TECHNICAL SPECIFICATIONS

  • A small-scale accessory to introduce students to the principles of combined convection (free and forced) with radiation from horizontal heated cylinder
  • Comprises a heated cylinder mounted in a vertical air duct, with a fan at the base of the duct, which can be used to provide a variable air flow over the cylinder
  • Heater rating 100W at 24V DC
  • K-type thermocouples measure the air temperature upstream and the surface temperature of the cylinder
  • Air flow velocity through the duct, under computer control
  • A comprehensive instruction manual is included

 

 

ขอใบเสนอราคา

ดาวน์โหลดโบว์ชัวร์

 

 

Engine by shopup.com