Plunger Pump Demonstration Unit
02 มิถุนายน 2566
ผู้ชม 250 ผู้ชม
DESCRIPTION
The FM53 replicates a plunger pump as used in industry to pump small quantities of liquid at high pressures. Electronic sensors measure the instantaneous cylinder pressure within the pump, the pump displacement and the cumulative flow.
The plunger or ram pump is a positive displacement pump and is used for pumping small quantities of liquid at high pressure. It is similar to a piston pump except that the sealing gland is at one end of the cylinder.
The reciprocating motion of the plunger gives an uneven flow, although the inclusion of a damping vessel can reduce this effect. Priming is unnecessary.
TECHNICAL SPECIFICATIONS
Max flow rate: 0.725 l/m typical
Max head: 4 bar
Swept volume: 15mm stroke x 32mm diameter
Pumping speed: 0 to 60 strokes/min
Motor power rating: 250W
Pressure Sensor: 0 to 100psi
Piston Sensor: -9 to 16mm
Motor Torque range: 0 to 2.1Nm
