Summary

Cod: MTC-100 (030101) | MTC-100-L (030103) | MTC-500 (030104) | MTC-500-L (030105)
Standard: Multiple

Universal single-column testing machine - Tensile, compression, elongation, cof, etc. testings - IDM Test.

With testing frames for capacities of 1 kN or 5 kN, we manufacture two standard models according to the length of the test column: MTC and MTC-L. It is also possible to customise the length of the column according to requirements.

Single-column universal testing machines are designed to test a wide range of materials in tension, compression, bending, tearing or peeling: plastics, films, rubber, packaging, non-woven material, filter material, leather, adhesives, paper, aluminium, food, toys, medical products, etc.

• High resolution colur touch screen: Change between numerical and graphic display modes. Real-time data to facilitate its interpretation.
• Control unit: Push-button controls to position the crossbar, stop, test characteristics and statistics. Configuration of the test routines, both standardised—ISO, ASTM and DIN—and customised. Possibility of pre-recording up to 100 different tests or routines.
• Machine connection to other devices without external software: Directly to a printer (PCL5 protocol) or to a PC to send files (csv, txt, pdf, etc.). To extract the information from the tests, we can connect it to a pen drive.
• Connection via software: The machine can be connected to a PC with our CAPTURE software to save the tests, operate the machine and have greater autonomy and control of the UTM.
• Fast and simple changes: Quick change of load cells and automatic recognition of these. The changes of jaws or devices are equally simple, allowing us to carry out a wide variety of tests on almost any material. The selection of the correct cell allows the machine to perform the tests with maximum precision.
• Robustness and rigidity: The combination of aluminium and steel in the construction of the machine allows us to safely handle a load greater than 150% of the nominal capacity.
• Complete control of speed and movement: The servomotor and low-friction ball screw drive allows us to have control over speed and precision in the position that makes it possible to test all types of material.
• Safety for overload protection: The machines have a double safety system, both electronic (programming) and physical (travel limiters). Load cells can be tared with a maximum of 20% of their nominal capacity without affecting the full scale.
• Connection interfaces and data outputs: RS-232 using ASCII mode and super high- speed binary mode, USB2 and Ethernet RJ45 10/100.
• Connection of strain gauges: Encoder, LVDT and laser types, to measure the elongation of the sample. All compatible strain gauges have their own anchors to facilitate their use and removal when they are not being used. We also have an internal pneumatic circuit, with air inlet and connection at the rear, to connect the devices that need air without having the pneumatic tubes in sight.
  
  

  		MTC-100	MTC-100-L	MTC-500	MTC-500-L
  IDM Test Code		30101	30103	30104	30105
  Nominal capacity	kN	1		5
  	Kg	100		500
  	lbf	200		1000
  Overloading test	150% of frame capacity
  Maximum diameter of sample	mm	150
  	in	6
  Load cells	N/kN	1000, 500, 250, 100, 50, 20, 10, 5		5000, 2000, 1000, 500, 250, 100, 50, 20, 10, 5
  Maximum travel without jaws	mm	500	750	500	750
  	in	19.65	29.5	19.65	29.5
  Range of test velocity	mm/m	0.05 to 750
  	in/min	0.002 to 29.50
  Approach speed	mm/m	0.05 to 750
  	in/min	0.002 to 29.50
  Return speed	mm/m	0.05 to 750
  	in/min	0.002 to 29.50
  Precision of load measurement	< ± 0.5% of the force applied for a range between 2 and 100% of (F.S.)
  Precision of position measurement	< ± 0.1% of the reading or 0.001 mm
  Precision of the velocity	< ± 0.005% of the preset velocity
  Weight	Kg	50	55	50	55
  	lb	110	121	110	121
  Dimensions	mm	480x397x900	480x397x1205	480x397x900	480x397x1205
  	in	18.90x15.60x35.40	18.90x15.60x47.45	18.90x15.60x35.40	18.90x15.60x47.45
  Operating temperature range	°C	Between 0 and 38
  	ºF	Between 32 and 100
  Operating humidity range	HR %	Between 10 and 90
  Air connection		Ø6 tube – 6 bar clean and dry
  Electrical connection		110/240 VAC – 50/60 HZ 2000 W

ขอใบเสนอราคา

ดาวน์โหลดโบว์ชัวร์